www.xpefiles.com

Hi !

Under Target Designer, i put the settings of my display adapter (Intel(r) 946GZ Express Chipset Family) the resolution to 1280*1024 but after the FBA process and to log me, the resolution screen become again to 800*600 !

Someone know why ?

thanks

kenshi:

Hi !

Under Target Designer, i put the settings of my display adapter (Intel(r) 946GZ Express Chipset Family) the resolution to 1280*1024 but after the FBA process and to log me, the resolution screen become again to 800*600 !

Someone know why ?

thanks

Hi kenshi,

Take a look at the FBA log in \Windows\FBA. Look near the end of the log for [FBAChangeDisplaySettings]. Maybe that will give you a clue why it's failing.

HTH,
Brad

bcombs:

kenshi:

Hi !

Under Target Designer, i put the settings of my display adapter (Intel(r) 946GZ Express Chipset Family) the resolution to 1280*1024 but after the FBA process and to log me, the resolution screen become again to 800*600 !

Someone know why ?

thanks

Hi kenshi,

Take a look at the FBA log in \Windows\FBA. Look near the end of the log for [FBAChangeDisplaySettings]. Maybe that will give you a clue why it's failing.

HTH,
Brad

All seems to be good. take a look :

15:49:51 PM -  [FBALaunch] D:\WINDOWS\FBA\FBAOC.EXE (ExitCode: 0x0)
 15:49:51 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbalib.dll, FBALaunchOCM
 15:49:51 PM -  [FBASetProgressText] Installing Components...
 15:49:52 PM -  [FBALaunch] D:\WINDOWS\system32\mstinit.exe /setup (ExitCode: 0x0)
 15:49:54 PM -  [FBALaunch] D:\WINDOWS\system32\regsvr32.exe /s /i D:\WINDOWS\system32\swprv.dll (ExitCode: 0x0)
 15:49:54 PM -  [FBALaunch] D:\WINDOWS\system32\regsvr32.exe /s /i D:\WINDOWS\system32\eventcls.dll (ExitCode: 0x0)
 15:49:54 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbareg.dll, FBAMigrateRegistryKeys
 15:49:54 PM -  [FBAChangeDisplaySettings] Settings: [1280, 1024, 32, 60]
 15:49:54 PM -  [FBAChangeDisplaySettings] Found settings!
 15:49:54 PM -  [FBAChangeDisplaySettings] Changing settings!
 15:49:54 PM -  [FBAChangeDisplaySettings] Success!
 15:49:54 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbalib.dll, FBAChangeDisplaySettings
 15:49:54 PM -  [FBASetProgressText] Resetting Setup Flag...
 15:49:55 PM -  [FBARemoveRestart] Updated BootExecute!
 15:49:55 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbalib.dll, FBAResetSetup
 15:49:55 PM -  [FBASetProgressText] Replacing System Hives...

 15:49:55 PM -  [FBASetProgressText] Resetting Setup Flag...
 15:49:58 PM -  [FBAFlushFilesToDisk] FlushFileBuffers(D:\) succeeded!
 15:49:58 PM -  [FBADoProperShutdown] Sleeping...
 15:50:08 PM -  [FBADoProperShutdown] Exiting process...
 15:50:53 PM -  [FBASetProgressText] Installing Components...
 15:50:53 PM -  [FBACallEntryPoint] LoadLibrary(D:\WINDOWS\system32\fic.bat) (Error: 0xc1)
 15:50:53 PM -  [FBASetProgressText] Resetting Setup Flag...

 An other idea ?

It is at the second boot that the resolution become again 800*600 after i log and applying user settings.

kenshi:

bcombs:

kenshi:

Hi !

Under Target Designer, i put the settings of my display adapter (Intel(r) 946GZ Express Chipset Family) the resolution to 1280*1024 but after the FBA process and to log me, the resolution screen become again to 800*600 !

Someone know why ?

thanks

Hi kenshi,

Take a look at the FBA log in \Windows\FBA. Look near the end of the log for [FBAChangeDisplaySettings]. Maybe that will give you a clue why it's failing.

HTH,
Brad

All seems to be good. take a look :

15:49:51 PM -  [FBALaunch] D:\WINDOWS\FBA\FBAOC.EXE (ExitCode: 0x0)
 15:49:51 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbalib.dll, FBALaunchOCM
 15:49:51 PM -  [FBASetProgressText] Installing Components...
 15:49:52 PM -  [FBALaunch] D:\WINDOWS\system32\mstinit.exe /setup (ExitCode: 0x0)
 15:49:54 PM -  [FBALaunch] D:\WINDOWS\system32\regsvr32.exe /s /i D:\WINDOWS\system32\swprv.dll (ExitCode: 0x0)
 15:49:54 PM -  [FBALaunch] D:\WINDOWS\system32\regsvr32.exe /s /i D:\WINDOWS\system32\eventcls.dll (ExitCode: 0x0)
 15:49:54 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbareg.dll, FBAMigrateRegistryKeys
 15:49:54 PM -  [FBAChangeDisplaySettings] Settings: [1280, 1024, 32, 60]
 15:49:54 PM -  [FBAChangeDisplaySettings] Found settings!
 15:49:54 PM -  [FBAChangeDisplaySettings] Changing settings!
 15:49:54 PM -  [FBAChangeDisplaySettings] Success!
 15:49:54 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbalib.dll, FBAChangeDisplaySettings
 15:49:54 PM -  [FBASetProgressText] Resetting Setup Flag...
 15:49:55 PM -  [FBARemoveRestart] Updated BootExecute!
 15:49:55 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbalib.dll, FBAResetSetup
 15:49:55 PM -  [FBASetProgressText] Replacing System Hives...

 15:49:55 PM -  [FBASetProgressText] Resetting Setup Flag...
 15:49:58 PM -  [FBAFlushFilesToDisk] FlushFileBuffers(D:\) succeeded!
 15:49:58 PM -  [FBADoProperShutdown] Sleeping...
 15:50:08 PM -  [FBADoProperShutdown] Exiting process...
 15:50:53 PM -  [FBASetProgressText] Installing Components...
 15:50:53 PM -  [FBACallEntryPoint] LoadLibrary(D:\WINDOWS\system32\fic.bat) (Error: 0xc1)
 15:50:53 PM -  [FBASetProgressText] Resetting Setup Flag...

 An other idea ?

It is at the second boot that the resolution become again 800*600 after i log and applying user settings.

Hi Kenshi,

Just a hunch, but I'm betting that the system tray applet for the Intel driver on a "first run" is resetting the display resolution to a default. Is it possible for you to diff the registry before and after you log in? This may be tough since the profile is being created when you log in the first time so the user.dat won't be there beforehand.

Kind of a chicken / egg scenario.

So, one thing that may work for you as a kludge is Qres: http://aksoftware.ne1.net/ Run it from the command line as a startup batch for your user. Or something like that anyway.

I have a system with that chipset here. I'll play around with it some over the weekend.

Brad

bcombs:

kenshi:

bcombs:

kenshi:

Hi !

Under Target Designer, i put the settings of my display adapter (Intel(r) 946GZ Express Chipset Family) the resolution to 1280*1024 but after the FBA process and to log me, the resolution screen become again to 800*600 !

Someone know why ?

thanks

Hi kenshi,

Take a look at the FBA log in \Windows\FBA. Look near the end of the log for [FBAChangeDisplaySettings]. Maybe that will give you a clue why it's failing.

HTH,
Brad

All seems to be good. take a look :

15:49:51 PM -  [FBALaunch] D:\WINDOWS\FBA\FBAOC.EXE (ExitCode: 0x0)
 15:49:51 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbalib.dll, FBALaunchOCM
 15:49:51 PM -  [FBASetProgressText] Installing Components...
 15:49:52 PM -  [FBALaunch] D:\WINDOWS\system32\mstinit.exe /setup (ExitCode: 0x0)
 15:49:54 PM -  [FBALaunch] D:\WINDOWS\system32\regsvr32.exe /s /i D:\WINDOWS\system32\swprv.dll (ExitCode: 0x0)
 15:49:54 PM -  [FBALaunch] D:\WINDOWS\system32\regsvr32.exe /s /i D:\WINDOWS\system32\eventcls.dll (ExitCode: 0x0)
 15:49:54 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbareg.dll, FBAMigrateRegistryKeys
 15:49:54 PM -  [FBAChangeDisplaySettings] Settings: [1280, 1024, 32, 60]
 15:49:54 PM -  [FBAChangeDisplaySettings] Found settings!
 15:49:54 PM -  [FBAChangeDisplaySettings] Changing settings!
 15:49:54 PM -  [FBAChangeDisplaySettings] Success!
 15:49:54 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbalib.dll, FBAChangeDisplaySettings
 15:49:54 PM -  [FBASetProgressText] Resetting Setup Flag...
 15:49:55 PM -  [FBARemoveRestart] Updated BootExecute!
 15:49:55 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbalib.dll, FBAResetSetup
 15:49:55 PM -  [FBASetProgressText] Replacing System Hives...

 15:49:55 PM -  [FBASetProgressText] Resetting Setup Flag...
 15:49:58 PM -  [FBAFlushFilesToDisk] FlushFileBuffers(D:\) succeeded!
 15:49:58 PM -  [FBADoProperShutdown] Sleeping...
 15:50:08 PM -  [FBADoProperShutdown] Exiting process...
 15:50:53 PM -  [FBASetProgressText] Installing Components...
 15:50:53 PM -  [FBACallEntryPoint] LoadLibrary(D:\WINDOWS\system32\fic.bat) (Error: 0xc1)
 15:50:53 PM -  [FBASetProgressText] Resetting Setup Flag...

 An other idea ?

It is at the second boot that the resolution become again 800*600 after i log and applying user settings.

Hi Kenshi,

Just a hunch, but I'm betting that the system tray applet for the Intel driver on a "first run" is resetting the display resolution to a default. Is it possible for you to diff the registry before and after you log in? This may be tough since the profile is being created when you log in the first time so the user.dat won't be there beforehand.

Kind of a chicken / egg scenario.

So, one thing that may work for you as a kludge is Qres: http://aksoftware.ne1.net/ Run it from the command line as a startup batch for your user. Or something like that anyway.

I have a system with that chipset here. I'll play around with it some over the weekend.

Brad

How can i have the registry before i log in ?

Freddy

kenshi:

bcombs:

kenshi:

bcombs:

kenshi:

Hi !

Under Target Designer, i put the settings of my display adapter (Intel(r) 946GZ Express Chipset Family) the resolution to 1280*1024 but after the FBA process and to log me, the resolution screen become again to 800*600 !

Someone know why ?

thanks

Hi kenshi,

Take a look at the FBA log in \Windows\FBA. Look near the end of the log for [FBAChangeDisplaySettings]. Maybe that will give you a clue why it's failing.

HTH,
Brad

All seems to be good. take a look :

15:49:51 PM -  [FBALaunch] D:\WINDOWS\FBA\FBAOC.EXE (ExitCode: 0x0)
 15:49:51 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbalib.dll, FBALaunchOCM
 15:49:51 PM -  [FBASetProgressText] Installing Components...
 15:49:52 PM -  [FBALaunch] D:\WINDOWS\system32\mstinit.exe /setup (ExitCode: 0x0)
 15:49:54 PM -  [FBALaunch] D:\WINDOWS\system32\regsvr32.exe /s /i D:\WINDOWS\system32\swprv.dll (ExitCode: 0x0)
 15:49:54 PM -  [FBALaunch] D:\WINDOWS\system32\regsvr32.exe /s /i D:\WINDOWS\system32\eventcls.dll (ExitCode: 0x0)
 15:49:54 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbareg.dll, FBAMigrateRegistryKeys
 15:49:54 PM -  [FBAChangeDisplaySettings] Settings: [1280, 1024, 32, 60]
 15:49:54 PM -  [FBAChangeDisplaySettings] Found settings!
 15:49:54 PM -  [FBAChangeDisplaySettings] Changing settings!
 15:49:54 PM -  [FBAChangeDisplaySettings] Success!
 15:49:54 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbalib.dll, FBAChangeDisplaySettings
 15:49:54 PM -  [FBASetProgressText] Resetting Setup Flag...
 15:49:55 PM -  [FBARemoveRestart] Updated BootExecute!
 15:49:55 PM -  [CallEntryPointThread] D:\WINDOWS\FBA\fbalib.dll, FBAResetSetup
 15:49:55 PM -  [FBASetProgressText] Replacing System Hives...

 15:49:55 PM -  [FBASetProgressText] Resetting Setup Flag...
 15:49:58 PM -  [FBAFlushFilesToDisk] FlushFileBuffers(D:\) succeeded!
 15:49:58 PM -  [FBADoProperShutdown] Sleeping...
 15:50:08 PM -  [FBADoProperShutdown] Exiting process...
 15:50:53 PM -  [FBASetProgressText] Installing Components...
 15:50:53 PM -  [FBACallEntryPoint] LoadLibrary(D:\WINDOWS\system32\fic.bat) (Error: 0xc1)
 15:50:53 PM -  [FBASetProgressText] Resetting Setup Flag...

 An other idea ?

It is at the second boot that the resolution become again 800*600 after i log and applying user settings.

Hi Kenshi,

Just a hunch, but I'm betting that the system tray applet for the Intel driver on a "first run" is resetting the display resolution to a default. Is it possible for you to diff the registry before and after you log in? This may be tough since the profile is being created when you log in the first time so the user.dat won't be there beforehand.

Kind of a chicken / egg scenario.

So, one thing that may work for you as a kludge is Qres: http://aksoftware.ne1.net/ Run it from the command line as a startup batch for your user. Or something like that anyway.

I have a system with that chipset here. I'll play around with it some over the weekend.

Brad

How can i have the registry before i log in ?

Freddy

Brad, Have you find a solution for me ? I don't know how to configure my component not to reset the display resolution .

Otherwise if someone have the answer, i will take it !

Freddy